
        D-Link DL10050-based FAST Ethernet Adapter
	D-Link DFE-550TX FAST Ethernet 10/100 Adapter
	D-Link DFE-550FX 100Mbps Fiber-optics Adapter
	D-Link DFE-580TX 4 Port Server Adapter
	D-Link DFE-530TXS PCI Fast Ethernet Adapter 

 	Installation for Windows for Workgroup 3.11


 Getting Started
 ---------------
**********************************************************
*  README for Windows for Workgroups v3.11 Installation  *
**********************************************************

Installation Procedure:

    - When LAN drivers is installed, Windows for Workgroups will present
      a list of all available drivers. Since there will be no DFE-550TX
      drivers initially, select UNLIST for 3rd party adapters not in
      the driver list.

    - Windows for Workgroups will ask for the drive/path containing
      the DFE-550TX driver. Type the following:

            <CD drive>:\WFW311   ;(Assume driver locate at CD-ROM)

    - Windows for Workgroups will attempt to locate an OEMSETUP.INF file
      in the specified path. If you have entered the path name correctly,
      Windows for Workgroups should copy the appropriate drivers to the
      Windows for Workgroups system.

    - One of the driver files "DLH5X.DOS" is located at path <CD drive>:\NDIS2\DOS
      Type this path if Windows for Workgroups ask for it.

    - At this point, the driver would have been properly copied and the
      installation would proceed to the next step.  Please refer to your
      Windows for Workgroups installation guide for correct procedures.

    - After the initial installation, the DFE-550TX drivers will be
      permanently copied to the Windows for Workgroups system.
      Subsequent network driver lists will already contain DFE-550TX
      drivers.